Church Design Concepts
Ceiling Height
Create as high a ceiling as possible. High ceilings help create the feeling that the space is important, which in turn helps instill reverence in the space. High ceilings are also required to create the acoustics needed for music, praying in unison, and projection of the voice. Music requires a high ceiling in order to sound full-bodied and powerful.
Symmetry
Use proportional spacing and balance to create a Symmetrical worship environment. The sanctuary, platform, altar area, pulpit, stage or other focal point of the worship space should be centered to allow most members of the congregation an un-obstructive view. When placing seating, it is important to use symmetrical design. If pews, theater seats or movable chairs are to be installed, several issues are important to consider prior to installing the seating. First, seating in an auditorium space is governed by federal, state and local fire and life safety codes. Prior to purchasing seating for your space, understand the requirements for your area. Many states limit the length of pews or rows of theater seats in order to insure a quick exit in case of an emergency.
Additionally, the minimum width of both center and side aisles is also regulated for the same reason. Keep in mind when planning a seating layout, that if your sanctuary space will be used for weddings or funerals, a center aisle that is five feet wide or wider will make walking down the aisle more picture perfect for the bride, and more dignified for the pall bearers with a casket.
Color Selection
Select colors that create interest and drama in the space. When choosing wall colors, select a palette that is off-white, cream or a very light tint. Walls painted dark colors, although dramatic, absorb light and cause the worship space to appear dark. Dark spaces can prove to be a difficult environment in which to read text or music.
Fabrics
Use fabrics, polished wood, lighting fixtures, artwork and window to create drama and give the space the feeling of reverence. The right combination of fabrics, decorative artwork and accent painting can set the mood for the worship space. Prior to designing, visit as many churches and other worship centers as possible to see what you like. Use rich fabrics to add warmth and color to the room.
Artwork
Size artwork so it fits the space and creates impact. Artwork may be statues, tapestries, sculptures, paintings, crosses, crucifixes, murals, mosaics, and decorative windows.
Decorative Windows
When selecting decorative windows, commonly referred to as “stained glass” there are several issues to consider. Not all stained glass windows are the same – in fact most church windows which the average church goers calls stained glass aren’t stained glass at all. The term stained glass refers to a specific style of decorative glass windows where the artist paints directly on the glass prior to firing the window in a kiln to meld the paint and glass into one creation. Stained glass windows are just one type of decorative church window. The other major classifications of church windows include art glass, etched glass, and faceted glass windows.
Woodwork
Used as a decorative element to trim walls, frame artwork or ceilings, wood is an excellent, long-lasting material. Make sure it is installed by a skilled woodworker and stained and varnished with top quality materials.
Furnishings
Just like in a home, furnishings make the room. Select a style of furnishings that creates the style and level of comfort and formality desired for the space. Pews come with many options, from solid wood in a variety of stained colors to white colonial style ends with carved wooden caps and fully upholstered seats and backs. Pews can be purchased to fit the architectural style of the worship space, no matter whether the space is gothic, colonial, traditional or contemporary. When selecting seating, whether pews, theater seats or stackable chairs, meet with several different manufacturers and compare styles, construction methods, and quality.
When considering pews and altar furnishings, keep in mind that the most visible part of the pew is the seating surface. Whether you select an upholstered seat and back or solid wood – select a pattern or finish that will create the desired effect in your worship space. Remember, the seating will be the single largest item in your worship space. Your seating selection will set the tone for the entire space.
Although the largest single furniture investment is the seating used by the congregation, the pulpit and other platform furnishings represent the focal point of the sanctuary. Since these furnishings are what everyone during the church service are actually looking at, it is very important that you select both the style and quality to set the tone for the entire sanctuary.
Sound Systems
Although the majority of the sound system is not seen, it is a major component to nearly every worship space. In many more contemporary spaces, it is not uncommon for sound systems to cost tens of thousands to many millions of dollars. When selecting a sound system, meet with a several qualified sound consultants and have them design a system specifically for your worship space. Buying components off the shelf and putting a sound system together might have worked for that great stereo in college; it just won’t work in a house of worship. Do it right the first time. Have a sound consultant experienced in systems for churches come to your church and design the right sound system for your church.
Planning and Space Allocations For Proper Design
When building your church, the following are some general rules of thumb for proper planning.
When purchasing property, it requires approximately one acre of usable land for each 120 people in attendance. This is sufficient to provide for the worship center, education building, offices, landscaping and parking. A Christian school, day car, recreation ministry, etc. will require additional land.
When purchasing land, plan on one usable acre of paved, striped parking for every 300 people. A paved, striped parking area should be able to accommodate between 100-115 cars per usable acre, and most building codes allocate 1 car per 3 people. Many local building codes may require islands of planted vegetation within the parking lot which reduces the number of cars per acre. A usable acre is one that does not contain non-buildable ground, such as wetlands, steep slopes, irregularly shaped property, ungradable hills, property that is not accessible, and or property which high tension power lines cross over and where cars are not allowed to drive under these power lines .
Sanctuary Seating Capacity
Sanctuaries seating up to 300 people usually require 15 to 17 square foot per person, 300 - 500 people usually require 17-20 square feet and over 500 people requires more than 20 square foot per person.
Praise Band/Orchestra Area
Allow 20 – 25 square feet per instrument
Video Projection Screen(s)
Allow 12 times the distance to the farthest seat in the congregation
Choir
10 - 12% percent of congregational seating
Choir Platforms are generally constructed so that each platform is 3’ 4” which gives the choir member room to stand in front of their seat. The choir area should have an acoustically reflective floor – not carpeting. Use hardwood, stone, vinyl or other material.
Congregational Seating
Pews – Fire Code allocates 18” per person in a pew, however reality dictates a more conservative 21” to 24” per person. Spacing between rows of pews is 36” from the cap rail of one pew to the cap rail of the next pew.
Pew length – 14 or 15 people maximum per pew. This rule is based on how quickly a pew can be evacuated in an emergency. Based on life safety codes, no more than 8 people from the middle of a pew or 15 people total.
Center aisle – 5’ minimum, however if you plan on holding weddings, funerals and other processions down the center aisle a minimum of 6’ is more realistic.
Theater Seats – Theater seats are a very good option for those congregations who need to maximize their seating area. Typically, installing theater seats over pews will Increase the seating capacity by 20%. Theater seats are a more efficient use of space by reducing the amount of space allocated per person to 18” or 20” as well as by allowing the theater seats to be spaced closer together than pews are by code.
Church Chairs - Fully upholstered chairs with either metal or wooden frames have been a popular option for churches that require flexibility with their seating. Unlike pews and theater seats, these chairs are not fixed to the ground which allows for flexibility in the chair layout whenever needed. These chairs will be the least expensive seating option. When planning a floor layout using church chairs, allow 24 inches width per person.
Education Building
When designing a Sunday school classroom – calculate 25 square feet per child. If the classroom is also to be used for a day school increase to 35 square feet per child or as required by local building code.
Administrative Offices & Other Rooms
Pastor’s study – 250 – 325 square feet
Administrative offices – 150 to 225 square feet
Meeting rooms – 15- 25 square feet per person
Music Library – 1 to 2 square feet per person
Choir rehearsal room -15 to 20 square feet per person
Orchestral rehearsal room - 25 square feet per person
Handbell rehearsal room – 20 feet by 30 feet desirable
Robing Rooms – 4 to 6 square feet per person
Fellowship Hall
Fellowship Hall should be sized to accommodate one-half of the sanctuary seating capacity.
Recreation
Playground – 75 square feet per child
|